Details
Features:
Brand New High Quality Curing Light.
Composes of high power LED, qualified fiber rod.
Noiseless; No libration; Generate little heat when working.
Low consumption of standby power with thirty days' standby time
Large capacity Li-battery can be used for a long one with full charging.
Plenty of fiber rods with very reasonable price on sale for your replacement.
Wireless/Cordless design without no cable connect to the unit which could be used very conveniently
It adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time.
Many brands' resin materials can be cured by this curing-light with optional working modes and lighting times.
Technical:
Light source: blue light
Wave length: 420nm-480nm
Output intensity: 1500-2200mW/cm; 7W LED
Power supply: rechargeable Lithium battery 3.7V/2000mAh
Input adapter: 100V to 240V~50Hz/60Hz (Available for global users.)
Safety kind: Ordinary type B.non—continuous service Ip40.Class 2
Working condition: environment temperature: 5℃-40℃; relative humidity:≤80%
The fiber rod can be autoclaved up to the tempreture134 °C / 273 °F & pressure 0.2Mpa. Build-in light meter within the base
Digital LED screen display, clear operation.
BEEP at each 5-seconds to indicate remaining curing time
Various Curing Time: seven preset curing time 5/10/15/20/25/30/40 seconds.
Three Preset Programs:
a. Fast mode: Full power all the time
b. Soft 1 mode: Generally increasing power in first 5 seconds, then full power till the end.
c. Soft 2 mode: Generally increasing power in first 5 seconds, then half power till the end.
Full supply of power can satisfy 10-second curing time for 200 times.
When running out of the battery, the unit can be operated directly with the switching power adapter.
Packing List:
Main Unit*1
Light Guide*1
Light Board*1
Charging base*1
100v-240v AC Adapter*1
English Operation Manual*1
Brand New High Quality Curing Light.
Composes of high power LED, qualified fiber rod.
Noiseless; No libration; Generate little heat when working.
Low consumption of standby power with thirty days' standby time
Large capacity Li-battery can be used for a long one with full charging.
Plenty of fiber rods with very reasonable price on sale for your replacement.
Wireless/Cordless design without no cable connect to the unit which could be used very conveniently
It adopts the principle of ray radiation to solidify the light-sensitive resin by shooting at it in a short time.
Many brands' resin materials can be cured by this curing-light with optional working modes and lighting times.
Technical:
Light source: blue light
Wave length: 420nm-480nm
Output intensity: 1500-2200mW/cm; 7W LED
Power supply: rechargeable Lithium battery 3.7V/2000mAh
Input adapter: 100V to 240V~50Hz/60Hz (Available for global users.)
Safety kind: Ordinary type B.non—continuous service Ip40.Class 2
Working condition: environment temperature: 5℃-40℃; relative humidity:≤80%
The fiber rod can be autoclaved up to the tempreture134 °C / 273 °F & pressure 0.2Mpa. Build-in light meter within the base
Digital LED screen display, clear operation.
BEEP at each 5-seconds to indicate remaining curing time
Various Curing Time: seven preset curing time 5/10/15/20/25/30/40 seconds.
Three Preset Programs:
a. Fast mode: Full power all the time
b. Soft 1 mode: Generally increasing power in first 5 seconds, then full power till the end.
c. Soft 2 mode: Generally increasing power in first 5 seconds, then half power till the end.
Full supply of power can satisfy 10-second curing time for 200 times.
When running out of the battery, the unit can be operated directly with the switching power adapter.
Packing List:
Main Unit*1
Light Guide*1
Light Board*1
Charging base*1
100v-240v AC Adapter*1
English Operation Manual*1