Details
Introduction:
Thank you for choosing D2 curing light unit．This unit is a kind of new type curing device which using the high-power, high—brilliance, pure blue light LED as light source，with the advance light guide rod．
1.The unit is using the LED which has 430—485nm wavelength in the dental operation
2. LED Screen, easy to check.
3. When works it generates little heat and does not need
a fans to cool the unit ,noiseless and without vibration
4. This unit has a Li large capacity battery，it can be used for a long one with full charging.
5.Because there are no cables connect to the handpiece，it could be used very conveniently
6. Three Mode:
“01”Mode：Gradually mode
“02”Mode：Flashing mode
“03”Mode：All light mode
7. Automatically power down：when the unit is standby andwithout pressing button for 8 minutes，this unit will be turned off automatically
8. low battery alert：Every time open the unit power if the voltage of the battery is lower than the set point, this unit will be alarm.
Specification:
Size:dia 22*175mm(unit)
Safety kind:Ordinary type B．non—continuous service Ip40．Class 2
Input voltage:100—240V,50-60HZ(we will send the correct plug according to buyer’s location)
Battery capacity:2000Mah
Wavelength:430-485nm
Intensity:10W≥1800mw／cm2
Solidification effect:20s，>3mm (3W) ，6s，3mm (10W)
Packing List:
Main unit
Light guide rod
Battery
Charger
Adaptor
Light cover plate
User manual (English
Thank you for choosing D2 curing light unit．This unit is a kind of new type curing device which using the high-power, high—brilliance, pure blue light LED as light source，with the advance light guide rod．
1.The unit is using the LED which has 430—485nm wavelength in the dental operation
2. LED Screen, easy to check.
3. When works it generates little heat and does not need
a fans to cool the unit ,noiseless and without vibration
4. This unit has a Li large capacity battery，it can be used for a long one with full charging.
5.Because there are no cables connect to the handpiece，it could be used very conveniently
6. Three Mode:
“01”Mode：Gradually mode
“02”Mode：Flashing mode
“03”Mode：All light mode
7. Automatically power down：when the unit is standby andwithout pressing button for 8 minutes，this unit will be turned off automatically
8. low battery alert：Every time open the unit power if the voltage of the battery is lower than the set point, this unit will be alarm.
Specification:
Size:dia 22*175mm(unit)
Safety kind:Ordinary type B．non—continuous service Ip40．Class 2
Input voltage:100—240V,50-60HZ(we will send the correct plug according to buyer’s location)
Battery capacity:2000Mah
Wavelength:430-485nm
Intensity:10W≥1800mw／cm2
Solidification effect:20s，>3mm (3W) ，6s，3mm (10W)
Packing List:
Main unit
Light guide rod
Battery
Charger
Adaptor
Light cover plate
User manual (English
